Hello Group, My question concerns terminating an LVDS receiver with two 50 ohm resistors in series with a center tap capacitor to ground across the inputs of the receiver to achieve better common mode noise rejection? What type of improvement if any will I see. Also, are there any draw back with this type of termination. Regards, Ken Ken Siders Sr. Design Engineer Lockheed Martin MFC 5600 Sand Lake Rd. MP 916 Orlando, FL 32819-8907 Phone: (407) 356-4891 Pager: (888) 363-3411 Fax: (407) 356-8944 Email: kenneth.w.siders@xxxxxxxx L ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu