[SI-LIST] JEDEC 1, 2, and 3
- From: "Ravinder Ajmani" <ajmani@xxxxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Mon, 10 Sep 2001 10:24:10 -0700
Hi SI Gurus,
I know this is not an SI question, but I have a lot of confidence on the
expertise of this group. Can someone help me understand the difference
between JEDEC 1, 2, and 3 for PC Board manufacturing. Also, what do
acronyms SPQL, EFR, and AFR mean in terms of an IC.
I will greatly appreciate any leads.
Regards,
Ravinder Ajmani
PCB Development and Design Department
IBM Corporation
Email: ajmani@xxxxxxxxxx
***************************************************************************
Always do right. This will gratify some people and astonish the rest.
.... Mark Twain
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
- » [SI-LIST] JEDEC 1, 2, and 3
