Hi all, I have a board that is high speed( 3.125/6.125 gb/s). we have many diff pairs in high speed connector area and don?t have space to route in high speed connector area. So my question is, how about if I will use the low speed connector area to route the high speed signal instead og routing between the high speed connector area. I am attaching a file where you can see the connector area. Do you think it will degrade my signal? Other option I have, increase the board layer which is adding more via length. so which will be best choice. Please recommend me. Thanks. taskina __________________________________ Do you Yahoo!? Read only the mail you want - Yahoo! Mail SpamGuard. http://promotions.yahoo.com/new_mail -- Binary/unsupported file stripped by Ecartis -- -- Type: image/bmp -- File: high_speed_and_low_speed_connector.bmp -- Desc: high_speed_and_low_speed_connector.bmp ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu