[SI-LIST] Re: Instrumentation Amplifier-- Configuration..

  • From: "Vivekkumar M-TLS,Chennai" <Vivekkumarm@xxxxxx>
  • To: steve weir <weirsi@xxxxxxxxxx>
  • Date: Wed, 24 Jun 2009 16:09:56 +0530

Hi Steve,

Thanks for the instant reply. We are maintaining the desired CMIR mentioned in 
the catalog.

The following is the behavior:

We Ground one of the inputs and apply voltage on the other in both cases below.

1) The instrumentation amplifier operates in single supply voltage, 5V, the 
voltage isn't as expected at the output.
2) Same amplifier is used again with the input voltage split into +2.5V at Vcc+ 
and -2.5V at Vee-. In this config we are able to get our desired output.

Regards
Vivek

-----Original Message-----
From: steve weir [mailto:weirsi@xxxxxxxxxx] 
Sent: Wednesday, June 24, 2009 3:34 PM
To: Vivekkumar M-TLS,Chennai
Cc: si-list@xxxxxxxxxxxxx
Subject: Re: [SI-LIST] Instrumentation Amplifier-- Configuration..

Any voltage within the CMIR may be applied to either input.

Vivekkumar M-TLS,Chennai wrote:
> Dear All,
> As you all know that the below is the circuit for the instrumentation 
> amplifier.
>
> [http://wpcontent.answers.com/wikipedia/commons/thumb/6/66/Opampinstrumentation.svg/350px-Opampinstrumentation.svg.png]
>
> Please can anyone guide me whether the circuit will work if I ground one of 
> the differential inputs.
>
> Like apply 1V at one of the inputs and ground the other differential input.
>
> Is this configuration advisable in a instrumentation amplifier or is there 
> any trade offs.
>
> Please advise me.
>
> Regards
> Vivek.
>
>
> DISCLAIMER:
> -----------------------------------------------------------------------------------------------------------------------
>
> The contents of this e-mail and any attachment(s) are confidential and 
> intended for the named recipient(s) only. 
> It shall not attach any liability on the originator or HCL or its affiliates. 
> Any views or opinions presented in 
> this email are solely those of the author and may not necessarily reflect the 
> opinions of HCL or its affiliates. 
> Any form of reproduction, dissemination, copying, disclosure, modification, 
> distribution and / or publication of 
> this message without the prior written consent of the author of this e-mail 
> is strictly prohibited. If you have 
> received this email in error please delete it and notify the sender 
> immediately. Before opening any mail and 
> attachments please check them for viruses and defect.
>
> -----------------------------------------------------------------------------------------------------------------------
>
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:
> //www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
>
> List technical documents are available at:
>                 http://www.si-list.net
>
> List archives are viewable at:     
>               //www.freelists.org/archives/si-list
> or at our remote archives:
>               http://groups.yahoo.com/group/si-list/messages
> Old (prior to June 6, 2001) list archives are viewable at:
>               http://www.qsl.net/wb6tpu
>   
>
>
>   


-- 
Steve Weir
Teraspeed Consulting Group LLC 
121 North River Drive 
Narragansett, RI 02882 

California office
(866) 675-4630 Business
(707) 780-1951 Fax

Main office
(401) 284-1827 Business 
(401) 284-1840 Fax 

Oregon office
(503) 430-1065 Business
(503) 430-1285 Fax

http://www.teraspeed.com
This e-mail contains proprietary and confidential intellectual property of 
Teraspeed Consulting Group LLC
------------------------------------------------------------------------------------------------------
Teraspeed(R) is the registered service mark of Teraspeed Consulting Group LLC


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                //www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  

Other related posts: