Good morning everyone. In EBD model, the keyword Len is the length of pattern, right? This IBIS is generated. [Path Description] /XUPCBD(0) Pin A6 Len = 0.0414555 L = 2.47486e-007 C = 2.11203e-010 R = 2.56347 / Len = 0.011303 L = 2.37766e-007 C = 2.5134e-010 R = 2.56347 / Len = 0.000898026 L = 2.47486e-007 C = 2.11203e-010 R = 2.56347 / Len = 0.0035921 L = 2.41418e-007 C = 2.57775e-010 R = 2.56347 / Len = 0.0237123 L = 2.47486e-007 C = 2.11203e-010 R = 2.56347 / Len = 0 L = 6.03614e-010 C = 2.08724e-013 / Len = 0 L = 6.03614e-010 C = 2.08724e-013 / Len = 0.00450031 L = 3.07164e-007 C = 1.22917e-010 R = 5.12693 / Node U2.54 1. The pattern connected with A6 is routed only Comp and Sold, why the Len is multiple? What does it mean? 2. Len = 0, is Via here, right?(The pattern connected with A6 has no discrete component) 3. L, C, R's dimension is what? nH/inch, pF/inch, ohms/inch? or nH/mm, pF/mm, ohms/mm? Any comment is helpful to me. Thank you for your reading. Inmyung. ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu