[SI-LIST] Improving SNR in Audio signals-PCB
- From: Saravanan Chml <saravanan.chml@xxxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Wed, 10 Sep 2014 18:47:30 +0530
Hi Experts,
Can you please advise me about improving SNR (Signal to Noise Ratio) in
PCB. I googled it and couldn't find any documents for this. Kindly direct
me towards right direction. The frequncy of audio signals that i am dealing
is about 1.28MHz only.
Thanks & Regards
K.Saravanan
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
