Hi Bala, Sorry, I don't completely understand your question. I'll have tech support follow up with you off-list. -- Colin Warwick Product manager for High Speed Digital, Agilent EEsof EDA ...feeds blog @ http://Signal-Integrity.TM.Agilent.com/feed/ ...tweets @signalintegrity -----Original Message----- From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On Behalf Of bala Sent: Tuesday, December 11, 2012 4:59 AM To: si-list@xxxxxxxxxxxxx Subject: [SI-LIST] IBIS-AMI Vs IBIS model Hi All, I am doing PCIe gen 2 channel simulation in ADS and i have IBIS-AMI model for my output and Ibis model for my input. If i put both different model in my topology,will this give better eye? -- bala ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu