[SI-LIST] Re: IBIS-AMI Vendor Support Help
- From: "Haller, Robert" <rhaller@xxxxxxxxxxxxx>
- To: Eric Monteiro <Eric.Monteiro@xxxxxxxxxx>, "si-list@xxxxxxxxxxxxx" <si-list@xxxxxxxxxxxxx>
- Date: Wed, 3 Feb 2010 13:15:18 -0500
Eric,
I believe SiSoft support is "out of the Box" and they do have a quite a
few models available (looking at their internal customer site). I know a number
of CAD tool vendors are presenting at DesignCon and would recommend contacting
them directly for Demo's.
Regards
Bob Haller
Si/Architect
Enterasys Networks
-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On
Behalf Of Eric Monteiro
Sent: Wednesday, February 03, 2010 11:00 AM
To: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] IBIS-AMI Vendor Support Help
Hello
I have been looking at channel designers from Mentor, Cadence, SiSoft, and
Sigrity that claim to support AMI models. However, to date I have only seen
Sigrity's channel designer support AMI models "out of the box", and can
generate the BER curves, and statistical eye's.
In the case of Mentor, it looks like they only have special support for the
Xilinx models embedded within the kit (? is this correrct ?). I assume this
means Mentor does not yet have a tool where you can take any vendors AMI model
and just drop into a schematic unless you work with them to develop a kit
similar to Xilinx.
Does anyone know if/how Mentor (Hyperlynx GHz), Cadence (Signal Explorer), and
SiSoft (Quantum Channel Designer) support out of the box AMI models?
Best Regards,
Eric
Gennum Corporation AMS Division
4281 Harvester Road
Burlington, Ontario L7L-5M4
Canada
Phone: 905-632-2999 x 4260
________________________________
This communication contains confidential information intended only for the
addressee(s). If you have received this communication in error, please notify
us immediately and delete this communication from your mail box.
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
