HI Pratap,
in ADS I trust the option "Use Package model" when set to "No" (not sure
about the exact wording).
This is what I often do .. not just if I have a better model (e. g.
S-Parameter), but also when I think that the package model is to big to
use lumped RLC i'm creating my own segmented model (based on lumped RLC)
and use this one instead of the single RLC model.
Hermann
EKH - EyeKnowHow
Signal Quality - Made in Bavaria
Hermann Ruckerbauer
www.EyeKnowHow.de
Hermann.Ruckerbauer@xxxxxxxxxxxxx
Itzlinger Strasse 21a
94469 Deggendorf
Tel.: +49 (0)991 / 29 69 29 05
Mobile: +49 (0)176 / 787 787 77
Fax: +49 (0)3212 / 121 9008
Am 30.05.2016 um 16:28 schrieb Pratap Simha:
Hi All,
When we use IBIS output buffer model along with a say HFSS extracted
package model (typically a touchstone format s parameter file) how can we
make sure the IBIS RLC package parasitic numbers are disabled and only the
s parameter package model file is used ? (In tools like ADS)
(Because we anyway have a accurate package model extracted and so we don't
want to have duplicated package models, one in ibis RLC package parasitics
, the othe as s parameter package model)
Thanks
Pratap
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
