Hi all, I am using a IBIS model of CMOS bus switch(IDTQS316211) in SI analysis. I have to simulate with switch ON mode and switch OFF mode. Whether i have to use same IBIS model for both mode or any other method i have to follow? -- With Best Regards Renukaradhya Hiremath TATA ELXSI LTD. Whitefield Road, Hoody, Bangalore -560048. Tel - 080 8410148-259 -- Binary/unsupported file stripped by Ecartis -- -- Type: text/x-vcard -- File: rnhiremath.vcf -- Desc: Card for Renukaradhya Hiremath ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu