[SI-LIST] IBIS basic question
- From: "Jing Wu" <JIWU@xxxxxxxxxx>
- To: <si-list@xxxxxxxxxxxxx>
- Date: Wed, 1 Dec 2004 16:59:00 -0800
Hi, ibis experts:
For the GND clamp I-V curve, normally the data is taken from -Vcc
to Vcc while for the power clamp I-V curve, the data is taken from Vcc
to 2Vcc. How about if both the GND clamp and Power Clamp curve have the
data from - Vcc to 2Vcc, will the simulator double-count the data or
different simulator have different solutions? =20
Thanks,
jing
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
