[SI-LIST] IBIS Fast-Strong/Typ/Slow-Weak Corners

  • From: "M. Haaeri" <mhaaeri@xxxxxxxxx>
  • To: si-list@xxxxxxxxxxxxx
  • Date: Tue, 24 Jun 2008 20:19:28 -0700

Hi All,
Different corners of IBIS models are made using high/low voltage, high/low
temp. and slow/fast process parameters. (e.g. Vcc: Typ=3.3v, Fast=3.6v,
Slow=3.0v). When simulating only at 3.3V, should I still use Fast and Slow
corners made for Vcc=3.6v and Vcc=3.0v repectively? If yes, how much would
the results differ from Fast and Slow corners if they were made for

M. Haaeri

To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List technical documents are available at:

List archives are viewable at:     
or at our remote archives:
Old (prior to June 6, 2001) list archives are viewable at:

Other related posts:

  • » [SI-LIST] IBIS Fast-Strong/Typ/Slow-Weak Corners