[SI-LIST] Re: Hyperlynx vs Signal Explorer

  • From: "Varun Khurana" <varunk@xxxxxxxxxxx>
  • To: "List` Si" <si-list@xxxxxxxxxxxxx>
  • Date: Wed, 10 Jan 2007 09:18:08 -0500

Craig,
 

Extraction of un-routed net or routed trace is done by using Topology >
Extract command in OrCAD PCB Editor.  

 

I will contact you offline to discuss further.

 

Varun

 


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                //www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  

Other related posts: