Hi, Dorin: Why it will be more accurate if you omit the coupling effect? Is that dues to that b's results are closer to measured one? Thanks! BH Dorin <dorin.oprea@xxxxxxxxxxx> wrote:Can you comment on the hspice simulation accuracy for a differential circuit (diff drv - TL - diff rec) when the transmission line is modeled as: a) two coupled traces 50 single landed and 100 ohm differential impedance versus, b) two single traces (no coupling) with 50 ohm impedance Is it true that b offers better accuracy? Thanks, Dorin -- Binary/unsupported file stripped by Ecartis -- -- Type: text/x-vcard -- File: dorin.oprea.vcf -- Desc: Card for Dorin ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu --------------------------------- Do You Yahoo!? "ÓÃÑÅ»¢ËÑË÷£¬ÕÒµ½¹ØÓÚ°Â˹¿¨µÄÒ»ÇÐ" ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu