Hi , I'm facing a strange trouble running Hspice. The job concludes successfully without any warnings or errors but there are no results files generated ( .tr, .ms etc). although I have some measurement statements. The list file shows the folllwing lines . analysis time # points tot. iter conv.iter op point 0.00 1 0 readin 5.40 errchk 0.21 setup 0.00 output 0.00 Which means there is no analysis done! Any info is welcome. Thanks , Purush. ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu