Is there a quick way to know what value to use for setting the initial condition for the voltage across a capacitor in a Hspice simulation of a high speed serial link such as PCI express? I assume if I new the bias points of the transmitter and receiver that would tell me but I am not sure how to find those out. I did run a very long simulation with the capacitor reduced from .1uF to .01uF but this takes a long time. Thanks ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu