It is quite unlikely. You need to apply bias voltage to get the right value for on-die capacitance. Steve. yardala wrote: > Hi, All > Can I measure the value of On Die Decoupling capacitor use only capacitor > meter > probing at pin Vdd and Vss ? > > When I use meter to measure the value of core logic are few nH and unstable, > the value of I/O power are several hundred pF. > > Does these value make sense ? does it good enough , or any other methods are > suggest ? > > Does the bonding wire effect the capacitor value ? > > Thanks! > > Yardala > > > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > List technical documents are available at: > http://www.si-list.net > > List archives are viewable at: > //www.freelists.org/archives/si-list > > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > > > -- Steve Weir IPBLOX, LLC 150 N. Center St. #211 Reno, NV 89501 www.ipblox.com (775) 299-4236 Business (866) 675-4630 Toll-free (707) 780-1951 Fax ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu