[SI-LIST] How to extract spice netlist from cadence BLD file?

From: Zhichao <zdeng1@xxxxxxxx>
To: si-list@xxxxxxxxxxxxx
Date: Fri, 9 Sep 2005 14:37:05 -0500

Hi All,

This may be a trivial question.
I am tring to do a signal integrity analysis for a board.

But I don't know how to get SPICE compatible netlist from cadence
board file xx.bld.

Thank you very much.

-- 
Best regards,
Zhichao Deng                          mailto:zdeng1@xxxxxxxx

Ph.D. candidate
Department of Electrical Engineering
University of Illinois at Urbana-Champaign

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                //www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

[SI-LIST] How to extract spice netlist from cadence BLD file?

Other related posts: