[SI-LIST] How to couple noise to the PDN of oscillator
- From: Zhangkun <zhang_kun@xxxxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Thu, 15 May 2008 10:40:06 +0800
Dear all
Now we are studying the effect of power noise on jitter. We meet a problem,
how to couple noise to the PDN. For example, we want to couple noise of
25MHz into the PDN of oscillator. However there is impedance dismatch. The
impedance of signal source is about 50ohm and that of PDN is about 0.1ohm.
The energy would be reflected.
Any advice would be helpful
Best Regards
Zhangkun
2008.5.14
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
