Tom, I am afraid I have to disagree with your synopsis that the "thermal" connections do not add impedance. My own experience in the layout of Hihg speed lasers drivers which are very low impedance is that "full-copper" vias reduce the parasitic inductance substantially. Soory for the late reply. -- Regards, __________ James G Roberts /___ ____ | jrobert@xxxxxxxxxxxxxxxxxxxxx Jim __ / /___/ / jgroberts@xxxxxxxxxx / /_/ /---| | Room: BE436, Hilversum \____/ /_/ Tel: +31 35 687 4308 Fax: 5976 ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu