[SI-LIST] How to configure a new model for choke in hyperlynx

  • From: "Zhenwei Wang (zhenwwan)" <zhenwwan@xxxxxxxxx>
  • To: "si-list@xxxxxxxxxxxxx" <si-list@xxxxxxxxxxxxx>
  • Date: Mon, 15 Oct 2012 09:08:52 +0000

Hi experts,
         Could anybody tell me how to configure a new model for choke in 
hyperlynx Boardsim? Are some parameters(inductor/DC resistor etc..) mandatory?
Any advices are appreciated. Thanks!
Zhenwei Wang

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List forum  is accessible at:
               http://tech.groups.yahoo.com/group/si-list

List archives are viewable at:     
                //www.freelists.org/archives/si-list
 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  

Other related posts: