[SI-LIST] How good are tools to predict Radiated Emissions ?
- From: "Bashir, Shiraz \(GE Healthcare\)" <Shiraz.Bashir@xxxxxx>
- To: "SI-List" <si-list@xxxxxxxxxxxxx>
- Date: Fri, 26 May 2006 12:48:33 -0400
How good are tools to predict Radiated Emissions ?
I mean..we can layout a board using some flow. Then use a tool to see
how this design will do from Radiated Emissions perspective..
Did anyone of you have experience in this area ?
Are there any tools which can pull in products' packaging (mechanical
housing/ plastics, connectors location, length of slots etc..) and take
into account for analysis for Radiated Emissions..
Reason I am asking is that most of the company I know including mine
heavily rely on actual testing in-house (3 meter chambers) and outside
(10 Meters) which is risky..
Because project is near completion and any tweaks cost big $s.
Please let me know.
Shiraz Bashir
GE Healthcare
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
