Hello all at SI-List, I am trying to implement a PCB connector transition board for the purpose of measuring a structure at up to 20 GHz. I would be interested in using the best performing coax-to-PCB launch I can find so that it will not contribute losses to the actual structure losses I am interested in measuring (i.e., it will be invisible to the measurement, or as much so as possible). Two questions I have would be: 1) What would be the best connector type for this purpose (i.e., interfacing to VNA and high-speed o-scopes for s-parameter, TDR, and TDT measurements)? 2) How important is the PCB footprint for the connector; what would be the best way to make sure you are using the best footprint possible (assuming the case where PCB footprint for a PCB connector are not a no-brainer)? Some connectors I have been looking at would include: 2.4 mm (DC to 50 GHz): * Rosenberger 09K243-40ME3 * Southwest 1493-03A-5 Mini-SMP (DC to 65 GHz): * Rosenberger 18 S 203- 40M L5 * Rosenberger 18 S 102- 40M L5 Thank you in advance for any replies. Best regards, Michael This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately. ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu