A typical 2.54mm pitch pin socket combination using Au contacts is 3-5mOhms mated. It is pretty much a problem of surface area, material and contact force. Steve. At 05:07 PM 8/18/2006, Long nguyen wrote: > >hello, > >Could somebody recommend a 2 pin header / shunt / Terminal that has low >resisance (milli ohms range) ? (Vendor that makes these?) > >This two pin shunt will be inserted between the board power source (1.0V) >andload. I couldn't seem to find a good header that has low resistance to >usefor this (from Molex, Vishay...) > >thanks in advance. > >LN. > > > > > > > > >------------------------------------------------------------------ >To unsubscribe from si-list: >si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > >or to administer your membership from a web page, go to: >//www.freelists.org/webpage/si-list > >For help: >si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > >List FAQ wiki page is located at: > http://si-list.org/wiki/wiki.pl?Si-List_FAQ > >List technical documents are available at: > http://www.si-list.org > >List archives are viewable at: > //www.freelists.org/archives/si-list >or at our remote archives: > http://groups.yahoo.com/group/si-list/messages >Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu