[SI-LIST] High power shunt (~5A)

  • From: "Long nguyen" <calixlnguyen@xxxxxxxxxxx>
  • To: si-list@xxxxxxxxxxxxx
  • Date: Fri, 18 Aug 2006 17:07:23 -0700

 
hello, 

Could somebody recommend a 2 pin header / shunt / Terminal  that has low
resisance (milli ohms range) ? (Vendor that makes these?) 

This two pin shunt will be inserted between the board power source (1.0V)
andload. I couldn't seem to find a good header that has low resistance to
usefor this (from Molex, Vishay...) 

thanks in advance. 

LN. 

  

  



  
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  

Other related posts: