[SI-LIST] Help...

  • From: Manjusha <manjusha@xxxxxxxxxxx>
  • To: si-list@xxxxxxxxxxxxx
  • Date: Fri, 07 Feb 2003 13:00:05 +0530

    Need help on LVDS  Routing. If I use two adjacent layers for signal 
routing,what should be layer thickness, trace width,trace spacing etc. This 
is not about broadside coupled signals , but about edge coupled striplines 
on  adjacent routing layers.
Will the trace impedance of one layer get affected if one more routing 
layer comes in between it and ground? How to reduce crosstalk and EMI in 
this case?

Thanks in advance,

To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
or at our remote archives:
Old (prior to June 6, 2001) list archives are viewable at:

Other related posts: