[SI-LIST] Re: HW Debugging
- From: "Kotson, Michael" <mkotson@xxxxxxxxxxx>
- To: <jsantosfernandez@xxxxxxxx>, <si-list@xxxxxxxxxxxxx>
- Date: Fri, 2 Nov 2007 09:22:15 -0600
Hi Jesus,
As a general rule of thumb, you'll want to include out to the 5th
harmonic in your measurements. So, you're looking somewhere around a
3.5 GHz scope/probe bandwidth.
Best of luck,
Mike
-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx]
On Behalf Of Santos Fernandez, Jesus
Sent: Friday, November 02, 2007 6:05 AM
To: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] HW Debugging
Hello all,
=20
We are designing a PCB with fastest transmission clock speed of 600MHz.
We have 1GHz oscilloscopes (and below)
=20
Do you think we will need additional test equipment for any required
design testing?
If you think so, will you, please, suggest which minimum equipment will
be necessary?
=20
Thank you in advance,
J. Santos
=20
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at: =20
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
=20
*****************************************************************
*************
CONFIDENTIAL NOTE: This e-mail and any attachments may be
confidential and protected by legal privilege. If you are not
the intended recipient, be aware that you are hereby notified
that any unauthorized review, use, disclosure, dissemination,
distribution, or copying of this communication, or any of its
contents, is strictly prohibited. If you have received this
email in error, please notify us immediately by replying to the
sender and deleting this copy and the reply from your system.
Thank you for your cooperation.
EXPORT CONTROLLED DOCUMENT
This document may contain information whose export is restricted
by the Arms Export Control Act (Title 22, U.S.C., Sec 2751 Et
Seq.) or the Export Administration Act of 1979, as amended,
(Title 50, U.S.C., App. 2401, Et. Seq.) Violations to these
export laws are subject to severe criminal penalties.
All technical data forwarded by VT Miltope to its suppliers is
EXPORT CONTROLLED. Supplier shall not disclose technical data in
any form to a Foreign Person (including foreign person employees
of Supplier), or export the technical data from the United
States without U.S. Government authority and the written
authorization of VT Miltope Contracts Department.
*****************************************************************
*************
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
