An IBIS 4.1/AMS model can generate a PRBS pattern with pretty much any distribution. -----Original Message----- From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On Behalf Of Ed Sayre III Sent: Tuesday, February 07, 2006 1:26 PM To: aburney@xxxxxxxxxx Cc: si-list@xxxxxxxxxxxxx Subject: [SI-LIST] Re: HSPICE - adding jitter to ethernet serial link Hello, I am not sure if the newest version of HSPICE allows for the addition of random and deterministic jitter to a source. Your HSPICE FAE should be able to help you with this. That being said, you can prepare a source the old fashion way. That is by creating the pattern 0-1 transitions in a data stream (time, voltage) then using a PWL source and a dependant source with gain you can set the levels. You should be able to create the jitter in=20 this source fairly simply. The issue is that from run to run the jitter=20 is always the same, in other words no random jitter. Hope this helps. Regards -Ed ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ NORTH EAST SYSTEMS ASSOCIATES, INC -------------------------------------=20 "High Performance Engineering & Design" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Dr. Edward Sayre 3rd e-mail: esayre3@xxxxxxxx NESA, Inc. http://www.nesa.com/ 235 Littleton Rd, Unit 2 Tel +1.978.392-8787 Westford, MA 01886 USA Fax +1.978.392-8686 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ At 10:40 AM 2/7/2006 -0800, Ali Burney wrote: >Hi, > > >I am running gigabit Ethernet link simulation using HSPICE and have a=20 >question on adding jitter to the transmitted data. Is there any way to=20 >add Gaussian jitter to the transmitted data? I know that tools such as >Hyperlynx allow you to add transmit jitter. > > > >Thanks and best regards, > > > >A Burney > > > > > > >------------------------------------------------------------------ >To unsubscribe from si-list: >si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > >or to administer your membership from a web page, go to: >//www.freelists.org/webpage/si-list > >For help: >si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > >List FAQ wiki page is located at: > http://si-list.org/wiki/wiki.pl?Si-List_FAQ > >List technical documents are available at: > http://www.si-list.org > >List archives are viewable at: > //www.freelists.org/archives/si-list >or at our remote archives: > http://groups.yahoo.com/group/si-list/messages >Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > > >!DSPAM:43e8e99c153141517368465! ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: =20 //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu =20 ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu