Sorry if this has been covered: I have a need to deliver HSPICE netlists that use S-parameter models = (for vias). Don't have HSPICE documentation to check the correct syntax, and = our netlist won't pass thru the HSPICE parser. Error is on the = "DATAFILE=3Dxxx" =20 Here's the relevant text: " svia n1 n2 n3 n4 0 fqmodel=3Ddiffvia "=20 " .model diffvia sp n=3D4 datafile=3Dvia.s4p " Comments from you HSPICE experts out there, greatly appreciated... -- Gary ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu