I am looking for a pseudo high speed micro / high density connector or cable assembly. My requirements are the following: PCB Connector: - Fit 40 pairs of differential (RS-422) signals in less then 3.5" (2mm connector is probably the biggest that would fit) - Right angle, through-hole mount to the board - Work well for up to 30Mhz signals without cross talk, balanced - Provide good mechanical connection to mating connector, mechanically lock if possible I am also looking for a mating connector / cable solution which would connect with the PCB connector Mating Connector and cable: - Twisted differential pairs - Durable termination between mating connector and wire, wire preferably not smaller than 28 AWG - The twisted pair bundle is shielded - Cable up to 6 feet long Has anybody ran across a manufacturer / components which might work for these requirements? Thanks for your help, regards Bela Szabo ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu