I don't know what you mean by "gap". The reason that 2116 is not good is that
the weave results in peaks and valleys where the valleys are filled with pure
resin and the peaks are almost pure glass.
-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On
Behalf Of Istvan Nagy
Sent: Wednesday, December 30, 2015 7:20 PM
To: Lee Ritchey <leeritchey@xxxxxxxxxxxxx>; 'SI' <si-list@xxxxxxxxxxxxx>;
scott@xxxxxxxxxxxxx
Subject: [SI-LIST] Re: Glass Weave effects and Cross sectioning
Lee,
How come those fabrics yield better result than the 2116?
I have a photo album of glass fabrics from different vendors. The 1067, 1035
seems more loose than the 2116.
http://www.buenos.extra.hu/download/PCB_MATERIAL_LIBRARY.xls
For one vendor:
Measured gaps and coverage:
Fabric Xgap% Ygap%
106 74.05405405 50.48543689
1067 38.11188811 9.48905109
...
3070 14.18918919 11.26760563
2116 18.02325581 16.1849711
...
You see the 1067 has much bigger gaps than 2116.
I followed my intuitive idea that the more dense the fabric on the photo, the
more uniform it is and the least skew we get. Is there anything wrong with my
concept? Am I missing something? The percentage of 2layer/1layer/0layer areas
would determine the uniformity and density.
Layer, I mean layer of glass thread on top of each other. The 0layer gaps have
dimensions of 1.3…3mil (somewhat smaller than trace width), the weave pitch
ranges from 14mil…26mil (several times the trace width & diffpair gap), while
the impedance controlled PCB traces are 3.5mil…7mil (typically
4.5mil) wide and gaps are like 5-8mil (signal pitch 10mil). Typical
high-density high layer count designs I have seen are like this. So, none of
the fabrics have small enough dimensions to appear smooth to the traces while
having large % gaps. Therefore I relied on the gap percentage.
Scott,
To achieve the 14mil-18mil signal pitch, you need thick prepreg/core layers
like 6-8mil thick, then the whole stackup is thicker and needs more layers due
to lower density (18mil diffpairs vs 10 mil ones take more space). So my
18 layer 93mil stackup would become 26 layer and 200mil thick. Is this what you
are suggesting? pitch-matching would need 2x thick PCBs. Nice theory, but I am
not sure about the practicality. On the other hand... if this is proven
practice, I might consider it for my next designs.
Some form factors like ATCA have fixed board thickness, and increasing layer
count by 50% might be hard to justify. We have 200-300 10Gig diffpairs on my
latest board design, although we did not measure skew on it, just on-die
captured eye diagrams. Small company, no SI-team...
"know the fill direction of the laminate that... "
- I will keep that in mind. Somehow it has to go into the fab drawing gerber
file I guess.
So, gap-percentage, pitch-matching, documenting fill direction and 12+deg
rotation...
Best regards,
Istvan Nagy
Principal Hardware Engineer
-----Original Message-----
From: Lee Ritchey
Sent: Wednesday, December 30, 2015 2:05 PM
To: 'Istvan Nagy' ; 'SI' ; bbakshan@xxxxxxxxx
Subject: RE: [SI-LIST] Re: Glass Weave effects and Cross sectioning
Scott listed my preferred weave styles in another reply. And, yes we do
very well when we control the weave type. Better than any of the other
methods that have been proposed.
Just had a PCB with 200+ 10 Gb/S paths with the worst skew being 2 pSEC.
-----Original Message-----
From: Istvan Nagy [mailto:buenoshun@xxxxxxxxx]
Sent: Wednesday, December 30, 2015 1:35 PM
To: SI <si-list@xxxxxxxxxxxxx>; bbakshan@xxxxxxxxx; Lee Ritchey
<leeritchey@xxxxxxxxxxxxx>
Subject: RE: [SI-LIST] Re: Glass Weave effects and Cross sectioning
Lee,
What is on your list of good enough weaves? Are those provide much better
results than 2116? The nicer weaves are not as available as 2116, i am
talking about series production of networking and computing boards, not test
boards.
Do you expect the skew problem to be resolved mainly by glass style
selection?
Regards, Istvan, mobile
*** Sent from my BLU smartphone device *** On Dec 30, 2015 9:07 AM, Lee
Ritchey <leeritchey@xxxxxxxxxxxxx> wrote:
I have had severe skew problems with 2116 at 10 Gb/S. It is not on
my list of good weaves.
-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx
[mailto:si-list-bounce@xxxxxxxxxxxxx] On Behalf Of Istvan Nagy
Sent: Monday, December 28, 2015 10:53 PM
To: bbakshan@xxxxxxxxx; si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] Re: Glass Weave effects and Cross sectioning
Hello,
First getting on this topic of spread glass, everyone is looking for
the miracle spread that has no skew issues.
You can choose the glass style as a number, or to take it further and
choose a material manufacturer who promises mechanical spread or
square wave or other features too.
In reality the traditional glass styles (106, 1080) were kind of
"bad", newer more denser weaves (2116, 1501) are "better", but there
is no "excellent" fabric.
I just try to use 2116 for layers with 2Gig+ signals. So you specify
glass style, and material name, that's mainly what you can do about
it, before building the stackup for design and manufacturing.
You need to have the detailed datasheets listing all available glass
styles of your chosen material. Get glass fabric photos from your
material vendor (like Bill from NanYa), so you can see how much
difference those different fabrics (numbers) have in covered/uncovered
areas. The board area consists of "no glass", "1-layer glass",
"2-layer glass" parts. If you imagine a simple cloth fabric, you would
know what I mean. The best material has the smallest percentage of "no
glass" area and the largest percentage of "2-layer glass" area, that would
be the most uniform (logically thinking).
"If not, how can I guarantee that the right type of weave was indeed
selected when building my board?"
- instead of "they" building your stackup and board, you have to
determine the stackup before they manufacture it. If you just let fabs
and who knows who manufacture whatever for your board designs, then
many things can go wrong.
Regards,
Istvan Nagy
-----Original Message-----
From: Boris Bakshan
Sent: Sunday, December 27, 2015 10:16 PM
To: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] Glass Weave effects and Cross sectioning
Hi experts,
I've been reading much on glass weave effects and its contribution on
skew.
If I encounter a skew problem, can I say anything on weave type ,whether
it
is mechanically spread or not by doing a cross section of my traces?
If not, how can I guarantee that the right type of weave was indeed
selected
when building my board?
Thank you all!
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
