I have a question regarding gerbtool and the 274-D ACR's but I hesitate to waste too much BW here on polygons! If someone cares to respond to me directly I would appreciate it. Thx, Jim - Jim Antonellis janton@xxxxxxxxxxxxx Sandburst Corp www.sandburst.com Office: 978.689.1669 Cell: 978.618.4745 This message and any attachments are Confidential and may be Legally Privileged. It is intended solely for the addressee. If you are not the intended recipient, please delete this message from your system and notify us immediately. Any dis-closure, copying, distribution or action taken or omitted to be taken by an unintended recipient in reliance on this message is prohibited and may be unlawful. ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu