I have had several designs where GMII to GMII connection goes over connector. Typical application is of an uplink Gigabit ports on a 24 10/100 & 2 10/100/1000 port switches. Typically the uplink ports are on an optional module with GMII PHY residing on the module and GMII MAC interface on the board. Hope this will give you a confidence level that its a very doable thing. regards, Ghazzali Majeed Broadcom Corp. -----Original Message----- From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx]On Behalf Of Paul Strachan Sent: Friday, November 15, 2002 11:35 AM To: si-list@xxxxxxxxxxxxx Subject: [SI-LIST] GMII over Board-to-Board Connector Hi SI Group, We are working on a module which requires a GMII interface to it's carrier card. I know that the GMII interface is intended for IC to IC communication, but I am wondering if anyone has successfully connected GMII over a board-to-board connector? If so what type of connector was used and was there any problems with crosstalk? Or was there any problem with the signal degrading such that it was no longer compliant to the GMII receiver input potential template? We're nervous about the rise and fall times for the GMII clock, which are 0.7ns to 1.0ns. This works out to a knee frequency of 700 to 500Mhz and for single ended applications these frequencies are pushing the capabilities of many common connector styles. Any comments would be much appreciated. Thanks, Paul Strachan Spectrum Signal Processing ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu -- Binary/unsupported file stripped by Ecartis -- -- Type: application/ms-tnef -- File: winmail.dat ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu