Hi, Post this to IBIS reflector and did not get any response. Anyone can help me to clarify this ? Thanks Perry -------- Original Message -------- Subject: [IBIS-Users] static/dynamic overshoot/undershoot definition Date: Fri, 19 Sep 2003 09:06:13 -0400 From: Perry Qu <perry.qu@xxxxxxxxxxx> Organization: Alcatel Canada To: IBIS group <ibis-users@xxxxxxx> Hi, Can someone let me know in IBIS spec, where the static/dynamic overshoot/undershoot is defined ? At packaging pins or at die ? Thanks Perry -- Perry Qu Design & Qualification | 600 March Road Alcatel Canada | Ottawa, ON K2K 2E6, Canada DID: (613) 7846720 | FAX: (613) 5993642 |------------------------------------------------------------------ |For help or to subscribe/unsubscribe, email majordomo@xxxxxxx |with just the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or email a written request to ibis-request@xxxxxxxx | |IBIS reflector archives exist under: | | http://www.eda.org/pub/ibis/email_archive/ Recent | http://www.eda.org/pub/ibis/users_archive/ Recent | http://www.eda.org/pub/ibis/email/ E-mail since 1993 ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu