Darshan, If you are using HyperlLynx GHZ with Eldo-for-HyperLynx, I believe you can run a normal transient simulation from HL, then modify the resulting netlist with the necessary AC source and commands, then run AC analysis in Eldo stand-alone. Gary -----Original Message----- From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On Behalf Of Darshan Mehta Sent: Sunday, October 10, 2004 7:43 AM To: si-list@xxxxxxxxxxxxx Subject: [SI-LIST] Frequency Domain Analysis Hi Experts, Could you please tell me if there is any way to perform Frequency Domain Analysis with the help of HyperLynx or any other Tool. I want to submit the Frequency response of my Board to my client but I don't see any option to do that. Please help me on this. Thanks! Best Regards, Darshan Mehta Design Engineer (R&D) ICS Limited, India --------------------------------- Do you Yahoo!? Yahoo! Mail ? CNET Editors' Choice 2004. Tell them what you think. a ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu