[SI-LIST] Re: Fixturing and Calibration for Measurement Based Modeling Tutorial, DesignCon2009 Feb. 2nd
- From: "Barnes, Heidi" <heidi.barnes@xxxxxxxxxx>
- To: <colin_warwick@xxxxxxxxxxx>
- Date: Tue, 27 Jan 2009 18:03:10 -0600
Hi Colin,
Thank you for finding room on your website for the tutorial we are doing Monday
morning at DesignCon. The speakers are looking forward to having some great
discussions on this topic.
http://signal-integrity-tips.com/wp-content/uploads/2009/01/tf_ma4-designcon-2009-measurement-based-modeling-agenda.pdf
Regards,
Heidi Barnes
Verigy
-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On
Behalf Of colin_warwick@xxxxxxxxxxx
Sent: Tuesday, January 27, 2009 2:10 PM
To: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] Re: Training Classes - Designing for Signal Integrity with
Advanced Design System - Santa Clara CA February 24-27
Thanks, Heidi!
Folks, the flyer Heidi mentions is posted at:
http://signal-integrity-tips.com/wp-content/uploads/2009/01/tf_ma4-designcon-2009-measurement-based-modeling-agenda.pdf
-----Original Message-----
From: Barnes, Heidi [mailto:heidi.barnes@xxxxxxxxxx]
Sent: Tuesday, January 27, 2009 12:18 PM
To: WARWICK,COLIN (A-Americas,ex1)
Subject: RE: [SI-LIST] Training Classes - Designing for Signal Integrity with
Advanced Design System - Santa Clara CA February 24-27
Hi Colin,
FYI, on Monday Feb 2nd at 9am DesignCon is having a 3 hour tutorial on
Fixturing and Calibration for Measurement Based Modeling that you might want to
advertise on your website.... The tutorial looks at fixturing and calibration
techniques for getting accurate material properties and fixture removal to
improve the accuracy of simulations for predicting design performance.
http://www.designcon.com/2009/attendees/schedule.asp
Regards,
Heidi Barnes
Americas Application Development Center
Semiconductor Test Solutions
-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On
Behalf Of colin_warwick@xxxxxxxxxxx
Sent: Tuesday, January 27, 2009 8:45 AM
To: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] Training Classes - Designing for Signal Integrity with
Advanced Design System - Santa Clara CA February 24-27
Hi,
We're running our ADS SI training classes in two parts at our Santa Clara CA
location in February. Seating is limited, so early registration is advised.
Designing for Signal Integrity with Advanced Design System, Part 1
February 24-26, 2009
This three-day, hands-on course presenting simulation methodologies and
measurements on high-speed data signals. Topics include time- and
frequency-domain simulations in ADS (Advanced Design System), the ADS
convolution engine, using electromagnetic simulators for creating models in the
frequency-domain, time-domain reflectometry, crosstalk and coupling.
URL for Part 1:
http://tinyurl.com/agilent-ads-si-class-1
Designing for Signal Integrity with Advanced Design System, Part 2
February 27, 2009
This one-day, hands-on course presents broadband SPICE and IBIS models in the
Advanced Design System design environment.
URL for Part 2:
http://tinyurl.com/agilent-ads-si-class-2
Location for both parts:
Agilent Technologies
5301 Stevens Creek Boulevard
Santa Clara, CA 95051
Hope to see you there!
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
- » [SI-LIST] Re: Fixturing and Calibration for Measurement Based Modeling Tutorial, DesignCon2009 Feb. 2nd - Barnes, Heidi
