Dear all SI gurus, I have several questions regarding to Fiber Channel signal simulation. Currently I am trying to use XTK to simulate 2.4Gb/s Fiber Channel signals. Is XTK good enough for 2.4Gb/s simulation? or I shall use Hspice. Are there special concerns I need to be aware to get accurate simulation result? Is IBIS model good enough in quality for simulation? Will Power/Ground noise become major concerns? What shall I take care the most in order to get good margin in design? Do the connectors need to do impedance compensation? Your comments are highly appreciated. Best Regards, John Lin Senior SI Engineer, Server Team, ARD4 Quanta Computer Inc.,Taiwan, R.O.C. Email: John@xxxxxxxxxxxx Tel: 886+3+3272345 ext. 5183 ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu