Thank you for all who responded to the survey so far.
In case you want to voice your opinion and have not done so yet, the
survey is open for a few more days: until midnight of Sunday, March 6.
It takes only three-to-five minutes to respond.
On behalf of the panelists,
Istvan Novak
Oracle
On 2/23/2016 12:38 AM, Istvan Novak wrote:
At DesignCon 2016 there was a panel session "Needs and Capabilities for
Modeling of Capacitor Derating."
The panel session was a status summary for an ongoing discussion among a
small team of OEMs/designers, component manufacturers and EDA developers.
The discussion focuses on enabling designers to perform simulations that
consider component parameters such as temperature, bias and aging.
If you are interested in the topic and would like to express your need
and voice your opinion, you can do it by filling out the survey at
http://tinyurl.com/jv7qmcw
The opening page of the survey has links to the panelists slides and to
another supporting material.
The survey will be open until midnight of Sunday, March 6.
Thanks
The panelists
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
