Hi All, Wish you all a very happy and prosperous new year. I need to do some topology determination analysis for DDR DIMM modules. I am using eplanner ( scratchpad) for this. Since the IBIS models for the DIMMs (from micron) are available only as ebd- I translate those to XTK using the "ibis2xtk" utility (this gives me .top, .loc and a .ebd.typ file) However now Folks from Mentor/Innoveda tell me as of now I cannot read in these models into Scratchpad. I need help on the following front- Does anyone know a method / utility to convert either native ebd models to XTK- directly readable by Scratchpad ? Or Is there a simple workaround so that I can accomplish the analysis ? With thanks in advance Anurag Gupta ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu