[SI-LIST] Re: E-mail address harvesting (WAS; Re: Signal integrity and simulation)
- From: Faraydon Pakbaz <pakbazf@xxxxxxxxxx>
- To: drew3rdof3@xxxxxxxxxxxx
- Date: Sat, 29 Apr 2006 03:41:53 -0400
Drew;
My apology for asking this...You probably had enough of
"assist@xxxxxxxxxxxxxxxxxxxx".
I also was contacted to try this software. Just out of curiosity, have you
or anybody in
SI-LIST tried this software and can give "high" or "low" of this software.
I have tried it but
only the examples that is coming with the 30 day trail down load. I have
not done my own
design yet. Does anybody know If I am wasting my time or is there any merit
to try it or better
yet can recommend any similar software with of course affordable price?.
Thanks in
advance for your comments.
Regards;
Don Pakbaz
Silicon Solutions Engineering
IBM Systems & Technology Group
"Andrew W. Riley
III"
<drew3rdof3@adelp To
hia.net> <assist@xxxxxxxxxxxxxxxxxxxx>
Sent by: cc
si-list-bounce@fr "SI-LIST" <si-list@xxxxxxxxxxxxx>
eelists.org Subject
[SI-LIST] E-mail address harvesting
(WAS; Re: Signal integrity and
04/28/2006 06:01 simulation)
PM
Please respond to
drew3rdof3@adelph
ia.net
Once was enough.
Please stop e-mailing me.
Most importantly, please quit your e-mail address harvesting tactics.
Drew
----- Original Message -----
From: What-If Design Software LLC
To: drew3rdof3@xxxxxxxxxxxx
Sent: Friday, April 28, 2006 1:43 PM
Subject: Signal integrity and simulation
AS/SIST, the new low-cost signal integrity simulation software to prevent
signal integrity problems in high-speed printed circuit board designs, can
be found at www.what-if-software.com.
AS/SIST contains a SPICE engine, 2D+ PCB Model Generator, IBIS-to-SPICE
converter, Schematic Capture and Waveform Analyzer, plus extended Pulse
Train Generation and Eye Diagram analysis capabilities, and AS/SISTBridge
- a direct link to Matlab.
AS/SIST, validated in practice against >2.5Gb/s differential serial data
rate paths and 20ps rise time systems, is used to prevent problems such as
noise, reflections, cross talk and lossy MTL effects in designs ranging
from basic single-board layouts to differential signal system level
multi-board layouts at high bit rates. It is a stand-alone tool that
provides pre-layout PCB design solutions.
With AS/SIST, you evaluate different PCB layouts, IC drivers and
receivers, connector configurations and circuit alternatives by simulating
what-if variations - as you design.
At $695, AS/SIST is priced so that you can have a personal copy of
significant simulation software with comprehensive and easily-understood
operating instructions to get you up to speed quickly.
Don't let the price fool you. AS/SIST was designed by world-class signal
integrity experts who are dedicated to making excellent simulation
software very affordable.
You can evaluate AS/SIST free for 30 days.
So judge for yourself. Visit www.what-if-software.com to try AS/SIST and
compare it for value with any other signal integrity simulation software
on the market.
If you have any problems downloading, please contact us at
assist@xxxxxxxxxxxxxxxxxxxxx
Thank you.
What-If Design Software
You can also learn about AS/SIST and What-If Design Software from EETimes
at
http://www.eetimes.com/news/latest/showArticle.jhtml?articleID=178600441
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
