Hi experts, I want to measure the EMI radiation in the anechoic chamber. The setup of the measurement is as follows: the test board is put on the table to receive the signal and measured by spectrum analyzer. The RF signal generated by the signal source is launched into the horn antenna. We want to measure the maximum radiated E-field in accordance with the sweep frequency. However, the measurement setup just only operate at each excited frequency point? So, I wonder how can I to solve it and how to get the maximum E-field? Thanks a lot~ Vincent, Zhu 2012-02-01 ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu