I don't have any experience with HK04J, but I've found that with Pyralux AP the
bond or coverlay material has a lot more influence on the effective loss
tangent than the Pyralux, so consider the whole stackup.
Regards,
Josiah Bartlett
-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On ;
Behalf Of Aubrey Sparkman
Sent: Wednesday, February 03, 2016 8:22 AM
To: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] DuPont™ Pyralux® AP VS DuPont™ Interra™ HK 04J
I've seen presentations on HK04J for power / ground pairs an even used it
myself. Since some PCB suppliers we would want to use for quick turn stock
Pyralux AP but not the HK04J, I was asked about a substitution. When I
compared data sheets, I didn't see a significant difference.
Can anyone comment?
Thanks,
Aubrey Sparkman
SparkRight Solutions
Sent from my
iPhone------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu