Dear all, I have a query regarding shielding the signals in Allegro/Spectra quest. I simulated some signals at 50MHz using Allegro/Spectra quest and found that there are overshoots and undershoots on the signals and also EMI. Also there is a crosstalk comming into picture. When i shielded the signal and tried for simulation, i found that there is no change. I even attached the 'shield_type' and 'shield_net' property to the signals. My question is, does the tool recognise the shielding property and will the simulation changes ?? with regards, kishore. Yahoo! India Matrimony: Find your partner online. ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu