Hi All. I have some S-parameters in touchstone format, and would like to convert them to RLC's. I know there's a slew of commercial tools out there that can do that, but I'd like to do it on my own Using Matlab/Mathematica/C/??? with the hope that I'll end up actually understanding the process. I understand how to do the other direction (i.e. given an RLC netlist create the S-parameters), but am wondering how I can derive an unknown set of RLC values + an unknown topology from a set of S-params. Any references to articles would be most welcome, as would be any comments whether this is a reasonable goal or not. Cheers Yaron ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu