[SI-LIST] Re: Differential pair via modeling
- From: "Doug Hopperstad" <doug.hopperstad@xxxxxxxxxx>
- To: <si-list@xxxxxxxxxxxxx>
- Date: Tue, 6 Jul 2004 09:18:19 -0500
Hi all,
I am looking for some information on differential via modeling. The
differential nets travel through via holes between non-adjacent layers.
A return stitch is typically placed near the layer jump via to provide a
return path for single-ended nets. With differential pairs, the
common-mode signal would need a return path but I am not finding any
information on how to calculate the anti-pad size, placement of the vias
and return stitch for differential nets.=20
I have been reading Howard Johnson's latest book on via modeling but it
only talks about single-ended vias.=20
Can someone provide a good reference source on this issue, thanks.
Doug Hopperstad
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
