[SI-LIST] Differential line Via - affecting common mode noise

  • From: "Lakshmi Narayanan Sowrirajan, ERS-HCLTech" <lakshminarayanans@xxxxxxx>
  • To: "si-list@xxxxxxxxxxxxx" <si-list@xxxxxxxxxxxxx>
  • Date: Thu, 9 Jun 2011 12:19:12 +0530

Hi Experts,
                How the via improve or degrade the differential lines common 
mode noise and performance as I am getting more common mode noise for a case 
where I don't have any via. If I include a transition via (modeled in HFSS - 
s4p model) the common mode noise is getting reduced. Please direct me to a good 
article/paper/book to understand the theory behind this.

Thanks & Regards
Lakshminarayanan. S


The contents of this e-mail and any attachment(s) are confidential and intended 
for the named recipient(s) only.
It shall not attach any liability on the originator or HCL or its affiliates. 
Any views or opinions presented in
this email are solely those of the author and may not necessarily reflect the 
opinions of HCL or its affiliates.
Any form of reproduction, dissemination, copying, disclosure, modification, 
distribution and / or publication of
this message without the prior written consent of the author of this e-mail is 
strictly prohibited. If you have
received this email in error please delete it and notify the sender 
immediately. Before opening any mail and
attachments please check them for viruses and defect.


To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List technical documents are available at:

List archives are viewable at:     
Old (prior to June 6, 2001) list archives are viewable at:

Other related posts: