Pravin, search for this thread in the SI-LIST Archives: "Serpentining one side of a differential pair" Regards, Pat -----Original Message----- From: pravin patel [mailto:fairfax100@xxxxxxxxxxxxx] Sent: Thursday, February 14, 2002 9:25 AM To: si-list@xxxxxxxxxxxxx Subject: [SI-LIST] Diff line I am doing layout of 2.5Ghz diff. line and having hard time to match length of a pair by 300 mil. I was going to make one line serpentine to make both line matched. By doing serpentine, I am creating impedance discontinuty or I will create skew. Any Ideas. Thanks -- ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu