Dear all, Given a Data Sheet (for example, a Typical SDRAM data sheet), is it possible to construct an IBIS model? If possible, how to obtain pull-up/pull-down curves, C_comp, rise/fall times, power/ground clamp from the Data Sheet. Please advise. Thank you very much in advance. -- Regards, Chai _________________________________________________________________ Are you in love? Find a date on MSN Personals http://match.msn.com.my/ ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu