Hi All, Could some one clarify me on DDR4 simulation in Hyperlynx 8.2.1 : How the Data Mask for DDR4 can be verified in the Hyperlynx ; Can we check the eye mask in the oscilloscope as like DDR3 or do we need to run the Fast Eye simulation (since eye mask is specified with 10^-16 BER) ? Also how to verify the eye mask for 10^-16 BER ? Thanks & Regards, S Sankar ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu