Hi Deepak, good day, 2.ADD/CMD need extra care. Hope u meant fly by termination. 3.Use separate plane for processor and memory.Dont use same plane for both device and follow some EMC guidelines. On Wed, Aug 4, 2010 at 2:26 PM, Katkoria, Deepak < Katkoria.Deepak@xxxxxxxxxxx> wrote: > Halo, > Presently, I am working on DDR3 interface. > I would like to know following things,(which are not explain in Std.) > 1. how to check the AC input logic high Vih(ac) in Oscilloscope?? > > 2. For the Fly by architecture, which signal is less immune and need > extra care for routing on inner layer DQ or ADD/CMD > > 3. I am getting lots of EMC emission on VTT plan for on board DDR3. What > could be the reason? > > 4. Do you know the difference between AC175 and AC150?? > > 5. Why there is AC reading in high speed signals, upto know I have only > dealt with Vih(dc) and never used Vih(ac). > > 6. why are they using AC rating with DC ratings?? > > > Cheers, > Deepak > > > > > ________________________________ > The information contained in this message may be confidential and legally > protected under applicable law. The message is intended solely for the > addressee(s). If you are not the intended recipient, you are hereby notified > that any use, forwarding, dissemination, or reproduction of this message is > strictly prohibited and may be unlawful. If you are not the intended > recipient, please contact the sender by return e-mail and destroy all copies > of the original message. > > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > List technical documents are available at: > http://www.si-list.net > > List archives are viewable at: > //www.freelists.org/archives/si-list > > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > > -- bala ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu